Belkin F5D9230UK4 - Manual (Page 26)

Alternate Setup Method
25 24 25 24
Step 1 Connecting your Gateway Router
1.1 Turn off the power to your modem by unplugging the power supply
from the modem.
1.2
Locate the network cable that is connected between your modem
and your computer and unplug it from your computer, leaving the
other end connected to your modem.
1.3
Plug the loose end of the cable you just unplugged into the port on
the back of the Router labeled “Internet/WAN”.
1.4
Connect a new network cable (not included) from the back of the
computer to one of the ports labeled “1–4”. Note: It does not matter
which numbered port you choose.
1.5
Turn your cable or DSL modem on by reconnecting the power
supply to the modem.
1.6
Before plugging the power cord into the Router, plug the cord into
the wall, then plug the cord into the Router’s power jack.
To Power Adapter
Mac or PC computer that was originally
connected to the cable or DSL modem
Network cable (to
computer)
Existing networking cable
(came with modem)