Bosch HBN 5405.0 A - Manual (Page 26)

26
Before you do this, you must clean the oven surfaces
which are not self-cleaning. Otherwise stains may
appear that cannot be removed.
1.
Set the function selector to 3D hot air Tā.
2.
Set the temperature selector to
clean
.
3.
Press the j button until the ? symbol flashes.
4.
Use the + button to set 1.00 hour.
The setting is adopted after a few seconds.
The oven will switch off automatically after one hour.
Switch off the function selector.
Wipe away salt residues from the selfĆcleaning
components using a moist cloth.
The glass panels on the oven door can be removed to
assist in cleaning.
Make sure when removing the inner glass panels that
you replace the panels in the same order. Use the
numbers on the panels to do this.
1.
Remove the oven door and lay it down on a cloth
with the handle facing downwards.
2.
Unscrew the cover at the top of the oven door. To
do this, undo the right and leftĆhand screws with a
coin (Fig. A).
3.
Raise the upper panel and remove it (Fig. B).
Caution
Setting procedure
When the oven has cooled
Cleaning the glass
panels
Removal