Brother MFC-5860CN - Manual (Page 46)

Chapter 5
36
Sending a fax manually
5
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a
Make sure you are in Fax mode .
b
Load your document.
c
Pick up the handset of an external
phone or press Hook
and listen for a dial
tone.
d
Dial the fax number you want to call.
e
When you hear the fax tone, press
Mono Start or Colour Start.
„ If you are using the scanner glass
press 1 to send a fax.
f
Replace the handset.
Out of Memory message
5
If you get an Out of Memory message
while scanning the first page of a fax, press
Stop/Exit to cancel the fax.
If you get an Out of Memory message
while scanning a subsequent page, you will
have the option to press Mono Start to send
the pages scanned so far, or to press
Stop/Exit to cancel the operation
Note
If you get an Out of Memory message
while faxing and you do not want to delete
your stored faxes to clear the memory,
you can send the fax in real time. (See
Real time transmission on page 34.)