Brother MFC-5860CN - Manual (Page 31)

21
3
3
Power Save mode
3
When the machine is idle, you can put the
machine into Power Save mode by pressing the
Power Save key. You can still receive
telephone calls in Power Save mode. For further
information on receiving faxes in the power save
condition, please see the table on page 21. If
you want to do other operations, you must take
the machine out of Power Save mode.
Note
• If you have connected an external
telephone or TAD, it is always available.
• You can retrieve faxes using Remote
Retrieval (See page 60.) if you are away
from your machine.
• With the machine in Power Save Mode all
lights will extinguish.
Putting your machine in
Power Save mode
3
a
Press Power Save key.
The LCD light goes off.
Bringing your machine out of
Power Save mode
3
a
Press Power Save key.
Note
• Even if you have put the machine into
Power Save mode, it will periodically clean
the print head to preserve print quality.
• If you unplug the AC power cord, no
machine operations will be available.
• You can customize Power Save mode so
that, apart from automatic head cleaning,
no machine operations are available.
Power Save setting
3
You can customize the machine's
Power Save key. The default mode is
Fax Receive:On
. Your machine can
receive faxes or calls even when the machine
is in Power Save mode. If you do not want
your machine to receive faxes or calls, turn
this setting to Fax Receive:Off.
a
Press Menu, 1, 6.
b
Press a or b to choose
Fax Receive:On
, or
Fax Receive:Off
.
Press OK.
c
Press Stop/Exit.
1
Should be set before you switch off the machine.
2 You cannot receive a fax automatically if you have
set the receive mode to Fax/Tel.
General setup
3
On/Off
setting Receive
mode Available operations
Fax
Receive:
On
(default)
Fax Only
External
TAD
Fax Receive
Fax Detect
Delayed Fax
1
Remote Fax Options
1
Remote Retrieval
1
„ You cannot receive
a fax with
Mono Start or
Colour Start.
Manual
Fax/Tel
2
Fax Detect
Delayed Fax
1
„ You cannot receive
a fax with
Mono Start or
Colour Start.
Fax
Receive:
Off
— No machine operations
will be available other
than cleaning the print
head.