Brother MFC-5860CN - Manual (Page 32)

Chapter 3
22
Mode Timer
3
The machine has four temporary mode keys
on the control panel: Fax, Scan, Copy and
Photo Capture. You can change the amount
of time the machine takes after the last Scan,
Copy or PhotoCapture operation before it
returns to Fax mode (default). If you choose
Off
, the machine stays in the mode you used
last.
a
Press Menu, 1, 1.
b
Press a or b to choose 0 Sec,
30 Secs
, 1 Min, 2 Mins, 5 Mins or
Off
.
Press OK.
c
Press Stop/Exit.
Paper settings
3
Paper Type
3
To get the best print quality, set the machine
for the type of paper you are using.
a
Press Menu, 1, 2.
b
Press a or b to choose Plain Paper,
Inkjet Paper
, Brother Photo,
Other Photo
or Transparency.
Press OK.
c
Press Stop/Exit.
Note
• The machine ejects paper with printed
surfaces face up onto the paper tray in the
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.
• (MFC-5860CN only)
You can only use plain paper in Tray#2.