Brother MFC-5860CN - Manual (Page 17)

General Information
7
1
1 Fax keys:
„ Hook
Press before dialing if you want to make
sure a fax machine answers, and then
press Start.
Also press this key after you pick up the
handset of an external telephone during the
F/T ring (fast double ring).
„ Redial/Pause
Redials the last number called. It also
inserts a pause when programming a quick
dial numbers.
„ Resolution
Lets you temporarily change the resolution
when sending a fax.
2 Copy keys (Temporary settings):
„ Options
Lets you temporarily change multiple copy
settings when in copy mode.
„ Quality
Lets you temporarily change the quality
setting.
„ Enlarge/Reduce
Lets you temporarily enlarge or reduce
copies depending on the ratio you choose.
„ Paper Type (MFC-5460CN only)
Lets you choose which type of paper you
want to use for the next copy.
„ Tray Select (MFC-5860CN only)
Lets you choose which tray you want to use
for the next copy.
3 Dial Pad
Use these keys to dial telephone and fax
numbers and as a keyboard for entering
information into the machine.
The # key lets you temporarily switch the
dialling mode during a telephone call from
Pulse to Tone (not available in New Zealand).
4 Mode keys:
„ Fax
Lets you access Fax mode.
„ Scan
Lets you access Scan mode.
„ Copy
Lets you access Copy mode.
„ Photo Capture
Lets you access PhotoCapture Center™ mode.
5 Menu keys:
„ Menu
Lets you access the main menu.
„ a Search/Speed Dial
Lets you look up and dial numbers that are
stored in the memory.
„ Volume keys
d c
In Fax mode, you can press these keys to
adjust the ring volume.
„ d
Press to scroll backward to a menu
selection.
„ a or b
Press to scroll through the menus and
options.
„ Clear/Back
Press to cancel the current setting, and go
back to the previous menu.
„ OK
Lets you choose a setting, or select an item.
6 Start keys:
„ Colour Start
Lets you start sending faxes or making
copies in full colour. Also lets you start a
scanning operation (in colour or mono,
depending on the scanning setting in the
ControlCenter software).
„ Mono Start
Lets you start sending faxes or making
copies in monochrome. Also lets you start a
scanning operation (in colour or mono,
depending on the scanning setting in the
ControlCenter software).
7 Power Save
Lets you put the machine into Power Save
mode (all the lights will extinguish).
8 Stop/Exit
Stops an operation or exits from a menu.
9 LCD (liquid crystal display)
Displays messages on the screen to help you
set up and use your machine.
10 Ink Management
Lets you clean the print head, print a test page
to check the print quality, and check the
available ink volume.