Philips TensRelief 12 selbstklebende Elektroden - Manual (Page 51)

Explanation of symbols
symbols on the device
- This is the symbol for reference number. This
symbol is followed by the manufacturer’s
reference number, which is the type number of
the device. The type plates on the remote control
and the TENS units show the same type number.
On the type plate of the remote control, the type
number is followed by the letters RC. On the
type plate of the TENS units, the type number is
followed by the letters TU.
- This is the symbol for serial number. This symbol is
followed by the manufacturer’s serial number.
- This symbol means: alternating current.
- This symbol means: direct current.
- This symbol on the remote control, the TENS
units and the extension cable, if provided, means:
protected against access to hazardous parts with
a finger and against vertically falling water drops
when tilted up to 15 degrees.
English 51