Philips TensRelief 12 selbstklebende Elektroden - Manual (Page 19)

Note: If the rechargeable battery of the TENS units
is not fully charged when you start a treatment, the
batteries may run out during the treatment. We advise
you to always fully charge the TENS units before you
start a treatment.
Note: Treatment is not possible when the TENS units
are charging.
1 Insert the adapter of the charger in a wall
socket.
2 Place the TENS unit with the rechargeable
battery (the one without the on/off button and
the indicators) in the charger.
, The battery status indicator on the other TENS
unit flashes green during charging.
, The battery status indicator stops flashing and is
solid green when the battery is fully charged.
3 Remove the TENS unit from the charger when
the battery is fully charged.
Note: Always disconnect the charger from the mains
after use by removing the adapter from the wall socket.
English 19