Philips TensRelief 12 selbstklebende Elektroden - Manual (Page 22)

, The screen prompts you to press the up arrow.
3 Press the up arrow on the selector.
, When you unlock the remote control, you can
use the control panel again.
, When you have inserted new batteries and the
TENS units are switched off, the ‘no connection’
screen appears.
Note: This ‘no connection’ screen may also appear
due to other causes (see ‘Error signals on the remote
control’ in chapter ‘Signals on the device’).
4 If you want to lock the remote control, hold
down the OK button for 2 seconds.
Note: There is nothing on the display when the remote
control is locked.
Tip: Lock the remote control when you have started
the treatment. This allows you to wear the remote
control attached to your belt or waistband or in a
pocket without any risk of unintentionally changing the
settings.
English 22