Brother MFC 9970CDW - Manual (Page 119)

Routine maintenance
111
A
Manual Registration
A
If colour still appears incorrectly after auto-
registration, you will need to perform manual
registration.
a
Press MENU.
b
Press a or b to display Printer.
Press Printer.
c
Press a or b to display
Manual Regist..
Press Manual Regist..
d
Press Print Chart.
e
Press Mono Start or Colour Start.
f
When the machine has finished printing
the registration chart, press
Set Regist. to correct the colour
manually.
g
Starting at 1 Magenta Left on the chart,
check which coloured bar has the most
uniform print density. Press
1 Magenta Left and choose the
number on the Touchscreen, using
d
or c to display more numbers if
necessary.
Repeat for 2 Cyan Left,
3 Yellow Left, 4, 5, 6 to 9.
h
Press OK if you finished entering the
numbers.
i
Press Stop/Exit.
Frequency
(Colour Correction)
A
You can set how often the colour correction
(Colour Calibration and Auto Registration)
occurs. The default setting is Normal. The
colour correction process consumes some
amount of the toner.
a
Press MENU.
b
Press a or b to display Printer.
Press Printer.
c
Press a or b to display Frequency.
Press Frequency.
d
Press Normal, Low or Off.
e
Press Stop/Exit.