Bosch 2000 - Manual (Page 36)

2000 Series | Program Entry Guide | 11.0 Point Codes EN | 36
Bosch Security Systems | 7/05 | 35114F
4 Point 4
Default: 9820A
Selection: Refer to Table 5, Table 6, Table 7, Table 8, and Table 9 for selections for each digit in the point code.
9820A Door, No Delay
No Delay Part point. Point arms when user turns the system
Part (or All) On. Point does not start entry delay.
Reports and alarm output enabled.
Trouble on short when the system is off. Swinger bypass
enabled.
Alarm Report delay enabled.
PT4
PART/NO DLY
5 Point 5
Default: 7820A
Selection: Refer to Table 5, Table 6, Table 7, Table 8, and Table 9 for selections for each digit in the point code.
7820A Motion Detector
No Delay All point. Point only arms when user turns the
system All On. Point does not start entry delay and is ignored
during entry and exit delays.
Reports and alarm output enabled.
Trouble on short when the system is off. Swinger bypass
enabled.
Alarm Report delay enabled.
PT5
ALL/NO DELAY
6 Point 6
Default: 7820A
Selection: Refer to Table 5, Table 6, Table 7, Table 8, and Table 9 for selections for each digit in the point code.
7820A Motion Detector
Same response as Point 5 .
PT6
ALL/NO DELAY
7 to 24 Points 7 to 24
Default: 0000A
Selection: Refer to Table 5, Table 6, Table 7, Table 8, and Table 9 for selections for each digit in the point code.
0000A Point Disabled
The system does not monitor disabled points. PT##
PT DISABLED