Brother FAX-2840 - Manual (Page 17)

Security features
11
2
Changing your memory security
password
2
a
Press Menu, 1, 6, 1.
b
Press a or b to choose Set Password.
Press OK.
c
Enter the registered four-digit password.
Press OK.
d
Enter a four-digit number for the new
password.
Press OK.
e
If the LCD shows Verify:, re-enter the
new password.
Press OK.
f
Press Stop/Exit.
Turning memory security on/off
2
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning memory security on
2
a
Press Menu, 1, 6, 1.
b
Press a or b to choose Set Security.
Press OK.
c
Enter the registered four-digit password.
Press OK.
The machine goes offline and the LCD
shows Secure Mode.
Turning memory security off
2
a
Press Menu.
b
Enter the registered four-digit password.
Press OK.
Memory Security is automatically turned
off and the LCD shows the date and
time.
Setting Lock
2
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Please call your
administrator or Brother Customer Service.
While Setting Lock is On, you cannot change
the settings without a password. You can only
change the following Fax transmission
settings that are in the FAX menu.
 Contrast
 Fax Resolution
 Delayed Fax
 Real Time TX
 Polled TX
 Overseas Mode
(For MFC-7240)
Also, machine settings cannot be changed
using Remote Setup while Setting Lock is On.