Brother FAX-2840 - Manual (Page 13)

General Setup
7
1
Dial Prefix
1
The Dial Prefix setting will automatically dial a
predefined number before every fax number
you dial. For example: If your telephone
system requires a 9 to dial an outside number
use this setting to automatically dial 9 for
every fax you send.
Setting up the prefix number
1
a
(USA) Press Menu, 0, 5.
(Canada) Press Menu, 0, 6.
b
Enter the prefix number (up to 5 digits)
on the dial pad.
Press OK.
Note
• You can use the numbers 0 to 9, #, l
and !. (Press Hook/Hold to display “!”.)
You cannot use ! with any other numbers
or characters.
If your telephone system requires a timed
break recall (hookflash), press Hook/Hold
to enter the break.
• (Canada only) If the pulse dialing mode is
on, # and l are not available to use.
c
Press Stop/Exit.
Changing the prefix number
1
a
(USA) Press Menu, 0, 5.
(Canada) Press Menu, 0, 6.
b
Do one of the following:
 To change the prefix number,
press 1.
To remove the prefix number, press
Clear to delete the digits. Go to step
c
.
 To exit without making a change,
press 2. Go to step d.
c
Enter a new prefix number using the dial
pad (up to 5 digits), press OK.
d
Press Stop/Exit.