Nokia E75 - Manual (Page 159)

Proxy servers are intermediate servers between a browsing
service and its users used by some service providers. These
servers may provide additional security and speed up access
to the service.
Select from the following:
•
Proxy server address — Enter the host name or IP
address of the proxy server in use.
• Realm — Enter the proxy server realm.
• User name and Password — Enter your user name and
password for the proxy server.
• Allow loose routing — Select if loose routing is allowed.
• Transport type — Select UDP , Automatic or TCP .
• Port — Enter the port number of the proxy server.
Edit registration servers
Select Options > New SIP profile or Edit > Registrar
server .
Select from the following:
•
Registrar server address — Enter the host name or IP
address of the registrar server in use.
• Realm — Enter the registrar server realm.
• User name and Password — Enter your user name and
password for the registrar server.
• Transport type — Select UDP , Automatic or TCP .
• Port — Enter the port number of the registrar server.
Configuration settings
Select Menu > Control panel > Settings and
Connection > Configurations .
You can receive messages from your service provider or
company information management containing
configuration settings for trusted servers. These settings are
automatically saved in Configurations. You may receive
configuration settings for access points, multimedia, or e-
mail services, and instant messaging (IM) or synchronization
settings from trusted servers.
To delete configurations for a trusted server, select
Options > Delete . The configuration settings for other
applications provided by this server are also deleted.
Restrict packet data
Select Menu > Control panel > Settings and
Connection > APN control .
With the access point control service, you can restrict packet
data connections from your device to certain access points
only. Your SIM card may not support the access point control
service. For more information, contact your service provider.
To restrict packet data connections from your device, select
Options > Activate restrictions . You need your PIN2 code
to activate and deactivate access point control or to edit the
packet data access points on the control list.
To add access points that can be used for packet data
connections to the control list, select Options > Add name
Settings
© 2008 Nokia. All rights reserved. 159