Charge the battery, Insert the memory card – Nokia E75 User Manual

Page 15

5. Close the back cover.

Charge the battery

Your battery has been precharged, but the charging levels

may vary.
1. Connect the charger to a wall outlet.
2. Connect the charger to the device. You can use your device

while it is charging.

3. When the battery is fully charged, disconnect the charger

from the device, then from the wall outlet.

To reach the full operation time, charge the battery until it

has been fully charged according to the battery level

indicator.

Tip: If you have old compatible Nokia chargers, you can

use them with the Nokia E75 by attaching the CA-44

charger adapter to the old charger. The adapter is

available as a separate enhancement.

USB charging

You can use USB charging when a wall outlet is not available.

When charging your device with the USB cable, the charging

time is longer.
With USB charging, you can also transfer data with USB cable

while charging the device.
1. Connect a compatible USB device to your device using a

compatible USB cable.
Depending on the type of the device that is used for

charging, it may take a while for charging to start.

2. If the device is switched on, select from the available USB

mode options on the display of the device.

Insert the memory card

Use a memory card to save the memory on your device. You

can also back up information from your device to the memory

card.

Quick start guide