Network settings, Connection settings – Nokia E75 User Manual

Page 151

•

Automatic redial

— Set your device to make a maximum

of 10 attempts to connect the call after an unsuccessful call

attempt. To stop automatic redialing, press the end key.

•

Show call duration

— Display the length of a call during

the call.

•

Summary after call

— Display the length of a call after

the call.

•

1-touch dialing

— Activate 1-touch dialing.

•

Anykey answer

— Activate anykey answer.

•

Line in use

— This setting (network service) is shown only

if the SIM card supports two subscriber numbers, that is,

two phone lines. Select which phone line you want to use

for making calls and sending text messages. Calls on both

lines can be answered irrespective of the selected line. If

you select

Line 2

and have not subscribed to this network

service, you are not able to make calls. When line 2 is

selected, is displayed in the home screen.

•

Line change

— Prevent line selection (network service),

if supported by your SIM card. To change this setting, you

need the PIN2 code.

Network settings

Select

Menu

Control panel

Settings

and

Phone

Network

To select the network mode, select

Network mode

and

Dual

mode

UMTS

, or

GSM

. In dual mode, the device switches

automatically between networks.

Tip: Selecting

UMTS

enables faster data transfer, but

may increase the demand on battery power and reduce

the battery life. In regions close to both GSM and UMTS

networks, selecting

Dual mode

may cause constant

jumping between the two networks, which also

increases the demand on battery power.

To select the operator, select

Operator selection

and

Manual

to select from available networks, or

Automatic

set the device to select the network automatically.
To set the device to indicate when it is used in a microcellular

network (MCN), select

Cell info display

Connection settings

Select

Menu

Control panel

Settings

and

Connection

Select from the following:
•

Bluetooth

— Edit the Bluetooth settings.

•

USB

— Edit the data cable settings.

•

Destinations

— Set up new or edit existing access points.

Some or all access points may be preset for your device by

your service provider, and you may not be able to create,

edit or remove them.

•

VPN

— Manage the settings for virtual private

networking.

•

Packet data

— Define when packet data network is

attached, and enter the default packet switched access

point name if you use your device as a modem for a

computer.

Settings

151