Nokia 6170 - Manual (Page 57)

56 Copyright © 2004 Nokia
• Configuration settings
You can configure your phone with settings that are required for certain services
to function correctly. The supported services are multimedia messaging, instant
messaging, synchronization, streaming, and browser. Your service provider may
also send you these settings. See “Connection settings service” on page 16.
For information on availability and the appropriate configuration settings,
contact your network operator or service provider.
Select Menu > Settings > Configuration settings and one of the following:
Default configuration sett.—Scroll to a service provider, and select Details to
view the services that the configuration settings of this service provider
supports, or select Options and one of the following:
• Set as default—Set the configuration settings of the service provider as
default settings.
• Delete—Delete the configuration settings.
Activate default in all applications—Activate the default configuration settings
in all services.
Preferred access point—Scroll to an access point, and select Options > Details
to view the name of the service provider, data bearer, and GPRS access point or
GSM dial-up number.
Personal configuration settings—Add new personal accounts for various services,
and activate or delete them. To add new configuration settings if you have not
added any, select Add new; otherwise, select Options > Add new. Select the
service type, and one by one select and key in all the required parameters. The
parameters differ according to the selected service type. To delete or activate a
personal account, scroll to it, and select Options > Delete or Activate.
• Security settings
Security features help to prevent accidental calls, allow you to restrict the calls
your phone can make and receive, and keep your stored information safe.
PIN code request
The PIN code (4–8 digits) provides extra security in case your phone is lost or
stolen. The PIN code must be obtained from your service provider. It is typically
provided with your SIM card.
You can set your phone to request the PIN code upon power-up. After three
successive incorrect entries the PIN code is blocked and you are asked to enter
the personal unblocking key (PUK) code. Some SIM cards do not allow you to
turn the PIN code request off.
1 Select Menu > Settings > Security settings > PIN code request.
2 At the prompt, enter the PIN code, and select OK > On > OK.