Nokia E63 - Manual (Page 68)

Traveling
Need directions? Looking for a restaurant? Your Eseries
device has the tools to get you where you want to be.
About GPS and satellite
signals
To use GPS, you need a compatible GPS receiver. Use
Bluetooth connectivity to connect to the GPS receiver. To start
using a compatible GPS receiver with Bluetooth connectivity,
select Menu > Connectivity > Bluetooth .
A GPS terminal receives low-power radio signals from the
satellites and measures the travel time of the signals. From
the travel time, the GPS receiver can calculate its location to
the accuracy of meters.
The Global Positioning System (GPS) is operated by the
government of the United States, which is solely responsible
for its accuracy and maintenance. The accuracy of location
data can be affected by adjustments to GPS satellites made
by the United States government and is subject to change
with the United States Department of Defense civil GPS policy
and the Federal Radionavigation Plan. Accuracy can also be
affected by poor satellite geometry. Availability and quality
of GPS signals may be affected by your location, buildings,
natural obstacles and weather conditions. GPS signals may
not be available inside buildings or underground and may be
impaired by materials such as concrete and metal.
GPS should not be used for precise location measurement,
and you should never rely solely on location data from the
GPS receiver and cellular radio networks for positioning or
navigation.
The trip meter has limited accuracy, and rounding errors may
occur. Accuracy can also be affected by availability and quality
of GPS signals.
To enable or disable different positioning methods, such as
Bluetooth GPS, select Menu > Tools > Settings >
General > Positioning > Positioning methods .
About satellite signals
If your device cannot find the satellite signal, consider the
following:
• If you are indoors, go outdoors to receive a better signal.
• If you are outdoors, move to a more open space.
• If the weather conditions are bad, the signal strength may
be affected.
• Establishing a GPS connection may take from a couple of
seconds to tens of minutes.
Satellite status
To check how many satellites your device has found, and
whether your device is receiving satellite signals, select
Menu > Tools > GPS data > Position > Options >
Satellite status . If your device has found satellites, a bar for
each satellite is shown in the satellite info view. The longer
© 2010 Nokia. All rights reserved. 68