Nokia E63 - Manual (Page 67)

• WLAN security settings — Edit the security settings
for the selected security mode.
• Homepage — Enter the web address of the page you
want to display as the home page when you use this
access point.
To set up a WLAN access point automatically, use the WLAN
wizard. Select Menu > Connectivity > WLAN wiz. .
Advanced access point settings
for WLAN
Select Menu > Tools > Settings > Connection > Access
points .
After setting up a basic access point for WLAN, select
Options > Advanced settings and define the following
advanced settings:
•
IPv4 settings — Enter the device IP and name server
addresses for the IPv4 internet protocol.
• IPv6 settings — Select or enter the name server
addresses for the IPv6 internet protocol.
• Ad-hoc channel — The channel is usually chosen
automatically. To enter the channel number (1-11)
manually, select User defined .
• Proxy server address — Enter the proxy server address.
• Proxy port number — Enter the proxy server port
number.
Connect PC to web
You can use your device to connect your PC to the web.
1. Connect the data cable to the USB connectors of your
device and your PC.
2. Select Connect PC to web . The necessary software is
automatically installed from your device to the PC.
3. Accept the installation in your PC. Accept also the
connection, if prompted. When the connection to the web
is established, the web browser of your PC opens.
You must have administrator rights to your PC, and the
autorun option enabled in the PC.
© 2010 Nokia. All rights reserved. 67