Nokia E63 - Manual (Page 120)

• WPA/WPA2 — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for device
identification).
• EAP plug-in settings — If you selected WPA/WPA2 >
EAP , select which EAP plug-ins defined in your device to
use with the access point.
• Pre-shared key — If you selected WPA/WPA2 > Pre-
shared key , enter the shared private key that identifies
your device to the WLAN to which you connect.
WPA security settings
Select WPA/WPA2 as the WLAN security mode.
Select WLAN security settings and from the following:
• WPA/WPA2 — Select EAP (Extensible Authentication
Protocol) or Pre-shared key (a secret key used for device
identification).
• EAP plug-in settings — If you select WPA/WPA2 >
EAP , select which EAP plug-ins defined in your device to
use with the access point.
• Pre-shared key — If you select WPA/WPA2 > Pre-
shared key , enter the shared private key that identifies
your device to the WLAN to which you connect.
• WPA2 only mode — To allow both TKIP and AES
(Advanced Encryption Standard) encryption, select Off . To
allow AES only, select On
Wireless LAN plugins
Select Menu > Tools > Settings > Connection > Access
points .
The EAP (extensible authentication protocol) plug-ins are
used in wireless networks to authenticate wireless devices
and authentication servers, and the different EAP plug-ins
make possible the use of various EAP methods (network
service).
You can view the EAP plug-ins currently installed in your
device (network service).
EAP plug-ins
1. To define the EAP plug-in settings, select Options > New
access point and define an access point that uses WLAN
as a data bearer.
2. Select 802.1x or WPA/WPA2 as the security mode.
3. Select WLAN security settings > WPA/WPA2 > EAP >
EAP plug-in settings .
Use EAP plug-ins
To use an EAP plug-in when you connect to a WLAN using the
access point, select the desired plug-in and Options >
Enable . The EAP plug-ins enabled for use with this access
point have a check mark next to them. To not use a plug-in,
select Options > Disable .
To edit the EAP plug-in settings, select Options > Edit .
To change the priority of the EAP plug-in settings, select
Options > Raise priority to attempt to use the plug-in
before other plug-ins when connecting to the network with
the access point, or Options > Lower priority to use this
plug-in for network authentication after attempting to use
other plug-ins.
See the device help for more information on EAP plugins.
© 2010 Nokia. All rights reserved. 120