Nokia E63 - Manual (Page 21)

Bluetooth connectivity is active.
Data is being transmitted using Bluetooth
connectivity. When the indicator is blinking, your
device is trying to connect with another device.
A GPRS packet data connection is available (network
service). If the icon is , the connection is active. If
the icon is , the connection is on hold.
An EGPRS packet data connection is available
(network service). If the icon is , the connection is
active. If the icon is , the connection is on hold.
A UMTS packet data connection is available (network
service). If the icon is , the connection is active. If
the icon is , the connection is on hold.
You have set the device to scan for wireless LANs
(WLAN), and a WLAN is available.
A WLAN connection is active in a network that does
not have encryption.
A WLAN connection is active in a network that has
encryption.
Your device is connected to a computer with a USB
cable.
The second phone line is being used (network
service).
All calls are forwarded to another number. If you
have two phone lines, a number indicates the active
line.
A headset is connected to the device.
The connection to a headset with Bluetooth
connectivity has been lost.
A hands-free car kit is connected to the device.
A loopset is connected to the device.
A text phone is connected to the device.
Your device is synchronizing.
You have an ongoing push-to-talk connection.
Your push-to-talk connection is in do not disturb
mode, because the ringing type of your device is set
to Beep once or Silent , or you have an incoming or
ongoing phone call. In this mode, you cannot make
PTT calls.
Common actions in
several applications
You can find the following actions in several applications:
© 2010 Nokia. All rights reserved. 21