Nokia 6265i - Manual (Page 88)

S e t t i n g s
87
The activated feature code is now stored in your phone, and you are returned to
the
Feature code: prompt. Continue entering other feature codes (for example,
*900 to cancel Forward if busy ), or press the end key to return to standby mode.
When you enter a network feature code successfully the feature becomes visible
in the
Network services menu.
Call forwarding
Call forwarding tells your network to redirect incoming calls to another number.
Call forwarding is a network service and may not work the same in all networks,
so contact your wireless provider for availability and information.
To activate, do the following:
1. In the standby mode, select Menu > Settings > Network services > Call
forwarding and one of the following:
Forward all calls —Forwards all calls to the number you specify.
Forward if busy —Forward incoming calls when you are in a call.
Forward if not answered —Forward incoming calls to another number if you
are unable to answer. You can set a delay before forwarding takes place.
Forward if out of reach —Forward incoming calls when your phone is off.
2. Select Activate .
3. Enter the number to which your calls, data, or other information are
forwarded, and select OK .
To cancel, in the standby mode, select Menu > Settings > Network services > Call
forwarding > Cancel all call forwarding .
Cancel all call forwarding may affect your ability to receive voice mail messages.
Contact your wireless provider for specific details.
Call waiting
Call If your wireless provider supports this feature, call waiting notifies you of an
incoming call even while you are in a call. You can accept, reject, or ignore the
incoming call.
To activate, in the standby mode, select Menu > Settings > Network services >
Call waiting > Activate .
During a call, select Answer or press the call key to answer the waiting call. The
first call is put on hold. Press the end key to end the active call.
To cancel, in the standby mode, select Menu > Settings > Network services > Call
waiting > Cancel .