Nokia 6265i - Manual (Page 70)

S e t t i n g s
69
Anykey answer
When Anykey answer is on, briefly press any key except the right selection or end
key to answer a call.
In the standby mode, select Menu > Settings > Call > Anykey answer > On or Off .
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your phone redials the
number, and notifies you once the network is available.
In the standby mode, select Menu > Settings > Call > Automatic redial > On or Off .
1-touch dialing
To activate or deactivate 1-touch dialing , do the following:
In the standby mode, select Menu > Settings > Call > 1-touch dialing > On or
Off . For more information on 1-touch dialing , see "Set up 1-touch dialing," p. 49.
Answer when slide opened
Set your phone to answer a call when you open the slide. If the setting is off, you
must press the call key after you open the slide.
In the standby mode, select Menu > Settings > Call > Answ. when slide opened >
On or Off .
End call when slide closed
Set your phone to end a call when you close the slide. If the setting is off, you
must press the end key after you close the slide.
In the standby mode, select Menu > Settings > Call > End call when slide
closed > On or Off .
Automatic update of service
If supported by your wireless service provider, this feature allows you to set your
phone to automatically receive updates from your network that may improve
service and coverage.
In the standby mode, select Menu > Settings > Call > Automatic update of
service > On or Off .
Calling card
If you use a calling card for long distance calls, you can save the calling card
numbers in your phone. Your phone can store up to four calling cards.