Nokia 6265i User Manual
Page 78
S e t t i n g s
77
To pair with a device, you and the owner of the other device must agree on a pass
code of 1–16 numeric characters. The first time you try to connect the devices,
you must each enter the same pass code. Once the devices are paired, you will
not need to use the pass code again, so there is no need to remember it.
Paired devices are placed in your paired device list. You can view the list even
when Bluetooth connectivity is not active or when the devices in the list are not
available for connection.
In the standby mode, select
Menu
>
Settings
>
Connectivity
>
Bluetooth
>
Paired devices
>
Options
and one of the following:
Assign short name
—Give a nickname to the selected device (visible to you only).
Request conn. authorization—Select
No
if you want the phone to connect to the
selected device automatically or
Yes
if you want the phone to ask for your
permission first.
Delete pairing
—Delete the pairing to the selected device.
Pair new device
—Search for active devices with Bluetooth technology within
range, scroll to the desired device, and select
Pair
to establish pairing with that
device. Do not accept Bluetooth connectivity from sources you do not trust.
Bluetooth connectivity settings
You can define how your phone is shown to other devices with
Bluetooth connectivity.
In the standby mode, select
Menu
>
Settings
>
Connectivity
>
Bluetooth
>
Bluetooth settings
and one of the following:
My phone's visibility
—Select
Shown to all
to show the phone to all other devices
with Bluetooth connectivity or
Hidden
to show the phone only to the paired devices.
Operating the phone in hidden mode is a safer way to avoid malicious software.
My phone's name
—Change your phone name that is seen by other users.
Set up a connection
1. In the standby mode, select
Menu
>
Settings
>
Connectivity
>
Bluetooth
>
On
. The active Bluetooth technology connection is indicated by
at the top
of the display.
2. Select
Search for audio enhancements
to search for compatible devices with
Bluetooth connectivity. The list of found devices appears in the display.
3. Select the desired device. If required, enter the Bluetooth connectivity pass
code of the device to complete the pairing.