beautypg.com

Security, Wireless communication switch – Toshiba Portege S100 User Manual

Page 86

background image

4-24

User’s Manual

Operating Basics

Wired Equivalent Privacy (WEP) data encryption, based on the 128 bit

encryption algorithm (Intel module type).

Wi-Fi Protected Access (WPA).

Security

Be sure to enable WEP (encryption) function. Otherwise your computer

will allow the illegal access by outsider through Wireless LAN to cause

illegal intrusion, eavesdropping, and loss or destruction of stored data.

TOSHIBA strongly recommend the customer to enable the WEP

function.

TOSHIBA is not liable for the eavesdropping of data due to the use of

Wireless LAN and the damage thereof.

Wireless communication switch

You can enable or disable Wireless LAN function, with the on/off switch.

No transmissions are sent or received when the switch is off. Slide the

switch to the right to turn it on and to the left to turn it off.

The numerical values for display are the theoretical maximums for

Wireless LAN standards. The actual values may differ.

The transmission speed over the wireless LAN and the distance over

which wireless LAN can reach may vary depending on surrounding

electromagnetic environment, obstacles, access point design and

configuration, and client design and software/hardware configurations.

The Transmit Rate (at X Mbit/s) is the theoretical maximum speed

under the IEEE802.11 (a/b/g) standard. The actual transmission speed

will be lower than the theoretical maximum speed.

Set the switch to off in airplanes and hospitals. Check the indicator.

It will stop glowing when the wireless communication function is off.

Turn the computer off when you enter an airplane and check the

carrier's regulations before you use a computer on board.