Toshiba Portege S100 - Manual (Page 130)

7-8 User’s Manual
HW Setup
USB
USB KB/Mouse Legacy Emulation
Use this option to enable or disable USB KB/Mouse Legacy Emulation.
If your operating system does not support USB, you can still use a USB
mouse and keyboard by setting the USB KB/Mouse Legacy Emulation
item to Enabled.
USB-FDD Legacy Emulation
Use this option to enable or disable USB-FDD Legacy Emulation.
Configuring the Execute-Disable Bit Capability and
TPM
The configurations for the Execute-Disable Bit Capability and TPM are
carried out in the BIOS setup program.
Enabled Enables the USB KB/Mouse Legacy Emulation
(Default).
Disabled Disables the USB KB/Mouse Legacy Emulation.
Enabled Enables the USB-FDD Legacy Emulation
(Default).
Disabled Disables the USB-FDD Legacy Emulation.
Notes before using the BIOS Setup
■ In normal cases, changes in system configuration should be made in
Windows using TOSHIBA HW Setup, TOSHIBA Password Utility,
TOSHIBA Power Saver, Device Manager, etc.
If the configuration in the BIOS setup program is different from the
configuration in the Windows utility, the configuration in the Windows
utility takes priority.
■ Depending on the system, changes made to the system configuration
might not be reflected.
■ The settings in the BIOS setup program are not erased even if the
power supply is switched off. However, if the built-in battery
(RTC battery) runs out of power, the settings will revert back to
their default values.
The following item does not revert back to their default values.
• Password
• HDD Password
• Security controller