Toshiba Portege S100 - Manual (Page 128)

7-6 User’s Manual
HW Setup
CPU
This function lets you set the CPU operating mode.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
LAN
Wake-up on LAN
This feature lets the computer’s power be turned on when it receives a
wake-up signal from the LAN.
Built-in LAN
This feature enables or disables the Built-in LAN.
It is displayed in Pentium-M ® model only.
Dynamically
Switchable
CPU power consumption and clock speed
automatic switching function is enabled.
When the computer is in use, CPU operation is
automatically switched when necessary
(Default).
Always High CPU power consumption and clock speed
automatic switching function is disabled.
The CPU always runs at its fastest speed.
Always Low CPU power consumption and clock speed
automatic switching function is disabled.
The CPU always runs at low power consumption
and low speed.
Enabled Enables Wake-up on LAN.
Disabled Disables Wake-up on LAN (Default).
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.
Enabled Enables Built-in LAN functions (Default).
Disabled Disables Built-in LAN functions.