Toshiba Portege S100 - Manual (Page 30)

1-14 User’s Manual
Introduction
TOSHIBA RAID
Console
If a secondary hard disk drive is installed in the
Ultra Slim Bay in addition to the built-in HDD,
you can use the TOSHIBA RAID Console to
create or manage a RAID array.
To start the utility, click start, point to All
Programs, point to TOSHIBA, point to RAID and
click RAID Console.
It is possible to change to RAID1 (mirroring) from
a non-RAID configuration (default).
Caution: When RAID1 is set, you cannot change
your setting unless you completely restore your
preinstalled software.
It is strongly recommended to read the TOSHIBA
RAID Help before you change any of the
settings.
NVIDIA Rotation
Settings
This utility let you rotate the desktop by 0 and
180 easily. It can rotate by clicking the icon
in a taskbar or pressing Ctrl + Shft + R.
In a multi-monitor setup, the display that
contains the cursor is effective.
TOSHIBA Password
Utility
This utility lets you set a password that restricts
access to the computer.
Sound drivers A broad range of audio controls are available
through the ADI sound driver, including Software
Synthesize, Mic Volume, Noise Reduction and
Audio Power Management.
Click start, click Control Panel and click
SoundMAX icon to change the Mic Noise
Reduction settings and the Power Management
settings. If you are viewing the Control Panel in
Category View, click on Switch to Classic View.
For other sound settings, use the Windows
Device Manager, Multimedia Panel or Volume
Dial.