Toshiba Portege S100 - Manual (Page 140)

8-8 User’s Manual
Optional Devices
7. Seat the memory module cover and secure it with one screw.
Seating the memory module cover
8. Install the battery pack. Refer to Replacing the battery pack section in
Chapter 6, Power and Power-Up Modes, for details.
9. Return your computer to the upright position.
10. Turn the power on and make sure the added memory is recognized.
Click start, click Control Panel, click Performance and Maintenance
and select the System icon. Open System Properties window and
click General tab.
Removing memory module
To remove the memory module, make sure the computer is in boot mode
then:
1. Set the computer to boot mode and turn the computer’s power off.
Make sure the Power indicator is off.
2. Remove AC adaptor and all cables connected to the computer.
3. Turn the computer upside down and remove the battery pack.
Refer to Replacing the battery pack section in Chapter 6,
Power and Power-Up Modes, for details.
4. Loose a screw securing the memory module cover.
The screw is attached to the cover to prevent it from being lost.
5. Slide your fingernail or a thin object under the cover and lift it off.
6. Push the latches to the outside to release the module. A spring will
force one end of the module up.
Be sure that the cover is closed firmly.
Be sure that the cover is closed firmly.