Toshiba Portege S100 - Manual (Page 117)

User’s Manual 6-13
Power and Power-Up Modes
7. Return your computer to the upright position.
Installing the battery pack
To install a battery pack, follow the steps below.
1. Turn the computer’s power off.
2. Disconnect all cables connected to the computer.
3. Close the LCD display panel and turn the computer upside down.
4. Insert the battery pack (➀).
5. Secure the battery pack lock. Check the battery lock (➁) was changed
to the lock position ( ).
Securing the battery cover
6. Return your computer to the upright position.
For environmental reasons, do not throw away a spent battery pack.
Please return spent battery packs to your TOSHIBA dealer.
■ The battery pack is a lithium ion battery, which can explode if not
properly replaced, used, handled or disposed of. Dispose of the battery
as required by local ordinances or regulations. Use only batteries
recommended by TOSHIBA as replacements.
■ Do not touch the battery release latch while holding the computer.
Or you may get injured by the dropped battery pack by unintentional
release of the battery release latch.
Battery pack
Battery lock