beautypg.com

General conditions, Placement of the computer – Toshiba Portege S100 User Manual

Page 52

background image

3-2

User’s Manual

Getting Started

General conditions

In general, if you are comfortable, so is your computer, but read the

following to make sure your work site provides a proper environment.

Make sure there is adequate space around the computer for proper

ventilation.

Make sure the AC power cord connects to an outlet that is close to the

computer and easily accessible.

The temperature should be 5 to 35 degrees Centigrade

(41 to 95 degrees Fahrenheit) and the relative humidity should be

20 to 80 percent.

Avoid areas where rapid or extreme changes in temperature or humidity

may occur.

Keep the computer free of dust, moisture, and exposure to direct

sunlight.

Keep the computer away from heat sources, such as electric heaters.

Do not use the computer near liquids or corrosive chemicals.

Do not place the computer near objects that create strong magnetic

fields (e.g., stereo speakers).

Some computers in the computer, including data storage media,

can be damaged by magnets. Do not place the computer near magnetic

objects or bring magnetic objects close to the computer. Be careful of

objects, such as stereo speakers, that produce strong magnetic fields

during operation. Also, be careful with metal objects, such as bracelets,

which can be inadvertently magnetized.

Do not operate the computer in close proximity to a mobile phone.

Leave ample ventilation room for the fan. Do not block the vents.

Placement of the computer

Position the computer and peripheral devices to provide comfort and safety.

Set the computer on a flat surface at a comfortable height and distance.

The LCD display panel should be no higher than eye level to avoid

eyestrain.

Place the computer so that it is directly in front of you when you work

and make sure you have adequate space to easily operate other

devices.

Allow adequate space behind the computer to let you freely adjust the

LCD display panel. The LCD display panel should be angled to reduce

glare and maximize visibility.

If you use a paper holder, set it at about the same height and distance

as the computer.