Toshiba Tecra S2 - Manual (Page 91)

TECRA A3/S2 4-12
Operating Basics
Using optical media drives
The illustrations in this section might differ slightly from your drive, but
operation is the same for all optical media drives. The full-size drive provides
high-performance execution of CD/DVD-ROM-based programs. You can run
either 12 cm (4.72") or 8 cm (3.15") CD/DVDs without an adaptor. An ATAPI
interface controller is used for CD/DVD-ROM operation. When the computer
is accessing a CD/DVD, an indicator on the drive glows.
If you have a CD-RW/DVD-ROM drive, refer also to the Writing CDs on
CD-RW/DVD-ROM drive section for precautions on writing to CDs.
If you have a DVD±R/±RW drive, refer also to the Writing CD/DVDs on
DVD±R/±RW drive section for precautions on writing to CDs.
If you have a DVD Super Multi drive, refer also to the Writing CD/DVDs on
DVD Super Multi drive section for precautions on writing to CDs.
If you have a DVD-ROM drive, you only can read DVD and CD from your
driver but no write capability to writable DVD or CD format.
Use the WinDVD 5 application to view DVD-Video discs.