Toshiba Tecra S2 - Manual (Page 132)

TECRA A3/S2 7-2
HW Setup
Password
This tab allows you to set or reset the user password for power on.
Parallel/Printer
Some models are equipped with Parallel/Printer tab. This tab lets you set the
Parallel Port Mode. Use the Windows Device Manager to make settings for
the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
Display
This tab lets you customize your computer's display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you use the display to be used when the computer is booted (This setting
is only available on Standard VGA mode and not available on Windows
Desktop).
CPU
This function lets you set the CPU operating mode.
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
ECP Sets the port type to Extended Capabilities Port
(ECP). For most printers, the port should be set to
ECP.
Standard
Bi-directional This setting should be used with some other
parallel devices (Default).
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD (Default).
LCD + Analog RGB Selects both the internal LCD and external monitor
for simultaneous display.
It is displayed in Pentium-M model only.
Dynamically
Switchable
CPU power consumption and clock speed
automatic switching function is enabled. When the
computer is in use, CPU operation is automatically
switched when necessary (Default).