Toshiba Tecra S2 - Manual (Page 161)

TECRA A3/S2 9-13
Troubleshooting
PC Card
Refer also to Chapter 8, Optional Devices.
Printer
Refer also to Chapter 8, Optional Devices, and to the troubleshooting and
other relevant sections in your printer and software documentation.
Memory cards
Refer also to Chapter 8, Optional Devices.
Problem Procedure
PC Card error occurs. Reseat the PC Card to make sure it is firmly
connected.
Make sure the connection between the external
device and the card is firm.
Check the card's documentation.
If problems persist, contact your dealer.
Problem Procedure
Printer does not turn on. Check that the printer is connected to an electric
outlet. Make sure the outlet is supplying power by
plugging in an appliance.
Computer/printer do not
communicate.
Make sure the printer is turned on and is online
(ready to use).
Inspect the cable connecting the printer to the
computer for damage. Make sure it is securely
connected.
A parallel printer connects to the parallel port.
Make sure the port is configured correctly.
Make sure your software is configured to
recognize the printer. Check your printer and
software documentation.
Printer error Check your printer documentation.
Check to see if ECP is enabled in BIOS.
If problems persist, contact your dealer.
Problem Procedure
Memory card error
occurs.
Reseat the memory card to make sure it is firmly
connected.
Check the card's documentation.
If problems persist, contact your dealer.