beautypg.com

Memory expansion, Installing memory module, Memory expansion -6 – Toshiba Tecra S2 User Manual

Page 140: Installing memory module -6

background image

TECRA A3/S2

8-6

Optional Devices

3. The memory card is designed so that it can be inserted only one way. Do

not try to force the card into the slot.

4. Do not leave a memory card partially inserted in the slot. Press the

memory card until you hear it click into place.

5. Do not twist or bend memory cards.
6. Do not expose memory cards to liquids or store in humid areas or lay

media close to containers of liquid.

7. After using a memory card, return it to its case.
8. Do not touch the metal part or expose it to liquids or let it get dirty.

Memory expansion

You can install additional memory in the computer's memory module socket

to increase the amount of RAM. This section describes how to install and

remove a memory module.

Installing memory module

Follow these steps to install a memory module:
1. Set the computer to boot mode and turn off the power.

a. The computer is turned on.
b. The computer was shut down using the Stand by mode.
c. Power to the optical media drive has been turned on by the CD Power

switch.

Before you install or remove a memory module, turn off the computer

with the Shut Down option in the Windows Start menu. If you install or

remove a memory module while the computer is in Standby or

Hibernation mode, data will be lost.

Some memory modules can be physically installed but are not

compatible with the computer. In this case the computer will issue a

warning.
TECRA A3/S2 series: There will be a long beep, 3 short beeps, 3 more

short beeps and then a long beep when you turn the power on. In this

case, shut down the power and remove the incompatible memory

module.
CAUTION: If you want to upgrade system memory, you should only use

certified modules. Ask your vendor or check the TOSHIBA web site for

a list of approved memory products.

If you use the computer for a long time, the memory modules will become

hot. In this case, let the memory modules cool to room temperature before

you replace them.

Do not try to install a memory module under the following conditions. You

can damage the computer and the module.

This manual is related to the following products: