Toshiba Tecra S3 - Manual (Page 75)

User’s Manual 4-7
Operating Basics
There is a section on Strong Logon Security in the help file, but the
function is not available in the fingerprint utility provided in this computer.
The sound during Log Off Current User (when logging off from OmniPass)
cannot be set to off even if the No Audio Prompts configuration is set in
Audio Settings. If you wish to turn it off, remove the settings for wav files in
the event settings of the sound events section of the Sound and Audio
Device Property in the control panel.
Set Up Procedure
Please use the following procedure when first using fingerprint
authentication.
Fingerprint Registration
Enroll the required authentication data using the “OmniPass Enrollment
Wizard”.
1. Click start, Point to All Programs, point to Softex and click OmniPass
Enrollment Wizard.
2. Click Enroll.
3. The Verify Username and Password screen is displayed. Ensure the
same Windows logon username and domain (*) are displayed before
entering a password into the Password field. Click Next.
(*) If the Windows logon account is for use within a LAN domain, enter
the domain name, otherwise, if you are unsure, please check with
the network administrator. If the logon is not used within a LAN
domain, you should just enter the computer name.
4. The Choose Finger screen is displayed. Based on the illustration,
select the finger to be recognized, and then click Next. Previously
enrolled fingerprints would have green check marks. The fingerprint
being enrolled now would have a red check mark. If any of the
previously enrolled fingerprints is selected again, the latest information
will be enrolled and previous information over-written.
We recommend first-timers to click Practice, and then swipe the finger
as a practice.
5. The Capture Fingerprint screen is displayed. Follow the onscreen
instructions and use the same finger you have selected under Choose
Finger to swipe three times to allow the sensor to read the fingerprint.
The fingerprint will be shown in green if properly read, or in red if the
reading is abnormal.
The fingerprint authentication uses the same Windows logon ID and
password. If the Windows logon password has not been setup,
please do so before registration.