Toshiba Tecra S3 - Manual (Page 32)

1-18 User’s Manual
Introduction
Options
You can add a number of options to make your computer even more
powerful and convenient to use. The following options are available:
DLA for TOSHIBA DLA (Drive Letter Access) is the packet writing
software which provides the function, which
writes files and/or folders to DVD-RW, CD-RW
and DVD+RW discs via a drive letter like a floppy
disk or other removable disks.
TOSHIBA Hotkey
Utility for Display
Devices
This utility has the change of a display device,
and the function to change display resolution.
Press Fn + F5 to change the active display
device. Press Fn + Space keys to change the
display resolution.
TOSHIBA SD
Memory Card Format
The TOSHIBA SD memory boot utility allows you
to create a bootable SD memory card.
CD/DVD Drive
Acoustic Silencer
This utility allows you to configure the read speed
of CD drive. You can either configure Normal
Mode, which operates the drive at its maximum
speed for quick data access, or Quiet Mode
which runs at single speed for CD audio and
which can lessen operational noise.
It is ineffective in DVD.
Memory expansion A 256, 512 or 1,024 MB memory module
(DDR2-533/400) can easily be installed in the
computer.
Battery pack An additional battery pack can be purchased
from your TOSHIBA dealer. Use it as a spare or
replacement.
High capacity battery
pack
An additional battery pack can be purchased
from your TOSHIBA dealer. Use it as a spare or
replacement.
AC adaptor If you use your computer at more than one site
frequently, it may be convenient to purchase an
additional AC adaptor for each site so you will not
have to carry the adaptor with you.
Battery charger The battery charger lets you charge extra
batteries outside the computer.
Security lock A slot is available to attach a security cable to the
computer to deter theft.