Toshiba Tecra S3 - Manual (Page 45)

User’s Manual 2-11
The Grand Tour
TOSHIBA
Presentation button
Press this button to change internal display,
simultaneous display, or multi-monitor display.
The default setting is the simultaneous display on
LCD and CRT with resolution of 1024 × 768.
When you press this button twice, the display
mode returns to single display on LCD only.
Setting of multi-monitor display in Windows XP,
computer changes its display mode to the
multi-monitor display on LCD and CRT.
You can also return to single display by pressing
this button twice.
The setting of TOSHIBA Presentation button can
be changed through the properties of TOSHIBA
Controls. Display mode is changed to the
multi-monitor display by selecting “Different
Image” (Windows XP only) or to the
simultaneous display on internal and external
display by selecting “Same Image”.
TOSHIBA Assist
button
Press this button to launch the program
automatically. When power-off, stand-by and
hibernation, press this button to start the
computer and launch the program.
You can select the function on TOSHIBA
Controls properties.
The default is TOSHIBA Assist.
Power button Press the power button to turn the computer’s
power on and off.
LCD Sensor switch This switch senses when the computer’s LCD
display panel is closed or opened and activates
the Panel Power Off/On feature. When you close
the LCD display panel the computer enters
Hibernation Mode and shuts down. When you
open the computer’s LCD display panel the
computer starts in Hibernation Mode. Use the
TOSHIBA Power Saver Utility to enable or
disable this feature. The default is “enabled”.
Refer to the TOSHIBA Power Saver Utility and
Panel Power Off/On items in Chapter 1, Special
features , for details on settings.
Do not put a magnetic object close to the switch. The computer will
automatically enter Hibernation Mode and shut down even if the Panel
Power Off features is disabled.