Toshiba Equium A210 - Manual (Page 31)

User’s Manual 1-11
A210
TOSHIBA Value Added Package
This section describes the TOSHIBA Component features pre-installed on
the computer.
Low Battery
Automatic
Hibernation
When battery power is exhausted to the point
that computer operation cannot be continued, the
system automatically enters Hibernation Mode
and shuts itself down. You can specify the setting
in the Power Options.
Hibernation This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk. When you
turn on the power again, you can continue
working right where you left off. Refer to the
Turning on the power section in Chapter 3,
Getting Started , for details.
Sleep In Sleep Mode, power to the system remains on,
but the processor and all other devices are
effectively in “sleep mode”. When the computer is
in Sleep Mode, the Power LED flashes amber.
The computer enters Sleep Mode regardless of
the Hibernate Mode setting. Refer to the Turning
on the power section in Chapter 3, Getting
Started , for details.
■ Before entering Sleep mode, be sure to save your data.
■ Do not install or remove a memory module while the computer is in
Sleep mode. The computer or the module could be damaged.
■ Do not remove the battery pack while the computer is in Sleep mode.
Data in memory will be lost.
TOSHIBA Power
Saver
TOSHIBA Power Saver provides you with the
features of more various power supply
managements.
TOSHIBA Button
Support
This utility controls the buttom operation of the
computer. The starting application from the
buttom can be changed.
TOSHIBA PC
Diagnostic Tool
The TOSHIBA PC Diagnostic Tool will display
basic system configuration information and
allow the functionality of some of the computer’s
built-in hardware devices to be tested.