Toshiba DVR18 - Manual (Page 47)

47 EN
In
troducti
on
Connecti
o
ns
Bas
ic Setup
P
layback
Ed
iti
n
g
V
CR Fu
ncti
on
s
O
th
ers
Fu
nc
ti
on
Set
u
p
Recordi
n
g
Settings for External Equipment
Video Colour System
When you record from external equipment or copy a
videotape to a DVD disc, you can set the format Auto,
PAL or SECAM.
1 In stop mode, press [SETUP]. Select
“General Setting” using [
U / D],
then press [ENTER / OK].
2 Select “Recording” using [ U / D],
then press [ENTER / OK].
3
Select “Video Colour System” using
[
U / D], then press [ENTER / OK].
4 Select “Auto”, “PAL” or “SECAM”
using [
U / D], then press
[ENTER / OK].
Auto: The video colour system will be set
automatically according to the recording
material.
PAL: The video colour system will be set to
PAL.
SECAM:The video colour system will be set
SECAM.
5 Press [SETUP] to exit.
Note
• During recording, when a signal other than PAL or
SECAM is detected, an error message appears on
the screen and recording will be paused. Recording
will be resumed when a PAL or SECAM signal is
detected.
Recording from External Equipment
Before recording from external equipment, see pages
21 to 22 for connection instructions.
1
Turn the TV and the unit on, and
select the input of the TV to which
the unit is connected.
Example 3
Timer
Recording
Satellite Link
Actual
Recording
HDMI
Reset All
General Setting
Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video Mode)
Make Recording Compatible
Bilingual Recording Audio
External Input Audio
Video Colour System
Playback
Display
Video
Clock
Channel
DivX
Recording
Auto
PAL
SECAM
Video Colour System
DVD-RW DVD-RW
Video
DVD-RW DVD-RW
VR
DVD-R DVD-R D DVD+R VD+RW W DVD+RW
D DVD+R VD+R DVD+R VCR VCR VCR
E9NG1BD_EN.book Page 47 Monday, April 7, 2008 5:54 PM