Toshiba DVR18 - Manual (Page 14)

14 EN
17 TIMER SET button (DVD / VCR)
• Press to set the unit in timer-standby mode. In
the timer-standby mode, press to cancel the
mode and to turn on the unit.
18 HDMI button
• Press to set the HDMI connector’s video signal
output mode.
19 ON / STANDBY button (DVD / VCR)
• Press to turn on or off the unit.
20 PROG. / buttons (DVD / VCR)
(DVD)
• Press to change the channel up or down.
(VCR)
• Press to change the channel up or down.
• Press to adjust the tracking during playback or
in slow motion of the tape.
• While playback is in still mode, you can adjust
the vertically blurred picture.
21 TIME SLIP button (DVD)
• Press once to start recording the TV programme
you are watching. Press again to watch the
content being recorded from the beginning while
recording continues. (VR mode DVD-RW discs
with the recording mode of LP, EP or SLP only)
22 CLEAR button (DVD / VCR)
(DVD)
• Press to clear the password once entered.
• Press to cancel the programming for a disc.
• Press to clear the selecting marker number in
the marker setup mode.
• Press to clear the programme once entered in
the timer recording setting mode.
(VCR)
• Press to reset the tape counter.
23 INFO button
• Press to display the DVB programme
information.
24 GUIDE button
• Press to call up the EPG list in DVB mode.
25 SUBTITLE button
• During playing back DVD or watching a DVB
channel which has subtitle information, press to
call up the Subtitle menu.
26 DISC MENU button (DVD)
• Press to display the Disc menu during playback.
• Press to change the Original and Playlist on the
TV screen. (VR mode only)
27 ENTER/OK button (DVD / VCR)
• Press to acknowledge or approve a menu
selection.
• While watching a DVB channel, press to display
the “Quick select” menu.
28 RETURN/BACK button (DVD / VCR)
• Press to return to the previously displayed menu
screen.
29 RED/GREEN/YELLOW/BLUE button
• Press to follow the DVB instruction displayed
on-screen.
SEARCH (BLUE) button (VCR)
• Press to call up the index or time search menu.
30 FWD f button (DVD / VCR)
(DVD)
• During playback, press to forward fast.
• When playback is paused, press to forward
slowly.
(VCR)
• Press to advance the video tape rapidly.
• Press to view the picture rapidly in forward
during playback.
• When playback is paused, press to forward
slowly.
31 STOP S button (DVD / VCR)
• Press to stop playing back or recording.
32 SKIP F button (DVD)
• During playback, press to skip to the next
chapter or track.
• When playback is paused, press to advance
step by step.
33 DVD button (VCR)
• Press to select the DVD output mode.
(See page 15.)
34 INSTANT SKIP button (DVD)
• During playback, press to skip 30 seconds.
(See page 60.)
35 REC I button (DVD / VCR)
• Press once to start a recording.
• Press repeatedly to start a One-touch Timer
Recording.
36 REC MODE button (DVD / VCR)
• Press to switch the recording mode.
37 1.3x/0.8x PLAY button (DVD)
• During playback, press to playback in a slightly
faster/slower speed while keeping the sound
output.
38 TIMER PROG. button (DVD / VCR)
• Press to display the timer programme setting
menu.
Note
• If you turn off this unit, [OPEN / CLOSE O] on the
remote control is not available. Be sure to use
[
O ( OPEN / CLOSE ) ] or [ O / S (EJECT / STOP)] on
the unit.
Button names described in the Owner’s Manual
The instructions in this manual are described mainly
with the operations using the remote control. Some
operations can be carried out using the buttons on
the front panel.
E9NG1BD_EN.book Page 14 Monday, April 7, 2008 5:54 PM