Toshiba Equium A100 (PSAAB) User Manual
Page 87
User’s Manual
4-26
Operating Basics
■
Make sure that your computer is running on AC power when using
WinDVD Creator.
■
Operate the computer at Full Power. Do not use power-saving
features.
■
While you are editing DVD, you can display previews. However, if
another application is running, the preview might not display
properly.
■
WinDVD Creator cannot show video on the external monitor when in
simultaneous mode.
■
WinDVD Creator cannot edit or play copy protected content.
■
Do not change display settings while using WinDVD Creator.
■
Do not enter standby/hibernation mode while using WinDVD
Creator.
■
Do not operate WinDVD Creator immediately after turning on the
computer. Please wait until all Disc Drive activity has stopped.
■
When recording to a DV-Camcorder, to ensure you capture all of
your data, let the camcorder record for a few seconds before you
begin recording your actual data.
■
CD recorder, JPEG functions, DVD-Audio, miniDVD, and Video CD
functions are not supported in this version.
■
While recording video to DVD or tape, please close all other
programs.
■
Do not run software like a screen saver because it can put a heavy
load on the CPU.
■
Do not run communication applications like a modem or a LAN.
2. Before recording the video to DVD.
■
When you record to DVD disc, please use only discs recommended
by the Drive manufacturer.
■
Do not set the working drive to a slow device like a USB 1.1 hard
disk drive or it will fail to write DVD.
■
Do not perform any of the following actions:
•
Operate the computer for any other function, including using a
mouse or TouchPad or closing/opening the LCD panel.
•
Bump or cause vibration to the computer.
•
Use the Mode control button and Audio/Video control button to
reproduce music or voice.
•
Open the DVD drive.
•
Install, remove or connect external devices, including the
following: PC card, SD card/Multi Media Card/Memory Stick,
USB devices, external display, i.LINK devices, optical digital
devices.
■
Please verify your disc after recording important data.
■
DVD-R/+R/-RW disc cannot be written in VR format.