Using the usb diskette drive, Using the usb diskette drive -3, Connecting 3 1/2" diskette drive – Toshiba Equium A100 (PSAAB) User Manual
Page 64
User’s Manual
4-3
Operating Basics
Using the USB diskette drive
A 3 1/2" diskette drive connects to the computer’s USB port.
It accommodates 1.44-megabyte or 720-kilobyte diskettes.
Refer to Chapter 2,
, for more information.
Connecting 3 1/2" diskette drive
To connect the drive, plug the diskette drive connector into a USB port.
Refer to the figure below.
Connecting the USB diskette drive
Print out
To send the item in the active window to the printer.
Application
buttons
Three application buttons have default setting. You can
assign other functions and programs to button 1 to 3.
Please refer to "Properties for Synaptics Dual Mode Pad" for details
Make sure the connector is right side up and properly aligned with the
socket. Do not try to force the connection, doing so can damage the
connecting pins.
If you connect the diskette drive after turning on the computer, it will take
about 10 seconds for the computer to recognize the drive. Do not
disconnect and reconnect before 10 seconds has elapsed.