Toshiba Equium A100 (PSAAB) - Manual (Page 122)

User’s Manual 7-4
HW Setup and Passwords
Display
This tab lets you customize your computer’s display settings for either the
internal LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
CPU
Dynamic CPU Frequency Mode
This option lets you choose from the following settings:
Auto-Selected Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
LCD+AnalogRGB Selects both the internal LCD and external
monitor for simultaneous display.
Dynamically
Switchable
CPU power consumption and clock speed
automatic switching function is enabled. When
the computer is in use, CPU operation is
automatically switched when necessary.
(Default)
Always Low CPU power consumption and clock speed
automatic switching function is disabled. The
CPU always runs at low power consumption and
low speed.