Toshiba Equium A100 (PSAAB) - Manual (Page 72)

User’s Manual 4-11
Operating Basics
Installing the batteries
1. Open the battery cover on the back side of the remote controller.
Push and remove the battery cover.
Opening the battery cover
2. Insert the batteries in place.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.
Inserting the batteries
3. Close the battery cover.
Close the cover securely until it clicks.
Closing the battery cover
Replacing the batteries
When the batteries in the remote controller become a low battery condition,
the remote controller may not operate correctly or work only within a short
distance from your computer. In these cases, purchase proper batteries
and replace the discharged ones with the new ones.
1. Open the battery cover on the back side of the remote controller.
Opening the battery cover