BT DF450 - Manual (Page 45)

42
Help
MESSAGE INTERPRETATION ACTION
LINE ON HOLD Line has been put on hold Press hold to restore normal
PRESS HOLD during telephone connection. operating mode.
TX POLL ERR Polling transmission Press STOP and reset
PRESS STOP unsuccessful. polling TX.
RX POLL ERR Polling reception unsuccessful. Press STOP and reset
PRESS STOP polling RX.
Transmission report messages
02: IMPOSSIBLE Line tone is not detected Make sure the fax is connected
CONNECTION or the machine is receiving correctly to the telephone line
incorrect tones. and that the telephone handset
has not been lifted. Contact the
receiving party and retry.
03: RECEIVER DOES NOT Remote fax machine not Contact destination party.
ANSWER answering.
04: ERRORS WHILE Error has been detected Repeat transmission from
TRANSMITTING RESEND during transmission (nn = the the page indicated on the
FROM PAGE nn page number on which the transmission report.
error was detected).
05: RESEND PAGES Certain pages have been Re-transmit the pages shown
nn,.......nn received unclearly on the on the transmission report.
remote fax machine (nn=page
number on which error is
detected.
06: LINE ENGAGED Engaged tone detected before Redial.
or after dialling.
07: DOCUMENT Time taken for Divide the document.
TOO LONG transmission exceeds
permitted limits.