BT DF450 User Manual

Page 19

Using your DF450

Delaying a fax

This allows you to transmit a fax automatically
at a pre-set time. This can be useful if you want
to send a fax abroad or at a time when call
charges are lower.

•

Insert the document to be faxed in the
Automatic Document Feeder.

•

If necessary, adjust contrast and resolution
(see Additional Features, page

)

•

Press the

FUNCTION

button until the

display shows

DELAYED TX

•

Press the

START

button and enter the fax

number.

•

Press the

START

button, display shows

TYPE TIME

•

Set the time you want the document to be
sent, using the keypad.

•

Press the

START

button to confirm the

setting.

•

Your DF450 will print a report confirming
the details. Do not remove the document.

•

Your fax will be sent at the time you have
specified.

If a delayed sending has already been set, you can
cancel the number by press the CLEAR button.

If using the 12-hour clock, press the FUNCTION
button to switch between am and pm.

If the document is removed before sending, the
DELAYED TX setting is cancelled.

To receive a fax

Your DF450 is pre-set to

AUTOMATIC RX

which

means it is ready to receive faxes automatically.
Remember to make sure there is plenty of
paper in the automatic sheet feeder.

•

When a call is received, your DF450 display
shows

CONNECTING

The fax is received and printed.

•

After the last sheet is printed, display
reverts to

AUTOMATIC RX.

See Setting the answer mode on page 17 for
details of reception modes and operation with a
phone or answering machine

To copy documents

Your DF450 can be used to copy a document.

•

Place document face down in the document
feeder and press the

START

button.

•

If you need more than one copy of a
document, simply repeat the process.

•

Press the

STOP

button to halt copying.

•

Press the

STOP

button again to eject page.

During reception, if the paper or ink runs out, a
paper jam occurs or the printer cover is opened,
then printing will be interrupted, reception will
continue and your DF450 will store the incoming
fax in its memory

. When the problem has been

rectified, your DF450 will print out the
documents stored in the memory.

See page 38 for document memory capacity.