Control panel – BT DF450 User Manual

Page 4

FUNCTION

Press to access the various menus.

CLEAR

Deletes incorrect entries.

RX MODE

Changes document reception settings.

ᮤ

Scrolls through settings available
under the function button.

RESOL

Selects the resolution for scanning
documents to be sent or copied.

Decreases the speaker volume (after
pressing the MONITOR button)

ᮣ

Scrolls through settings available
under the function button.

CONTRAST

Selects the contrast for scanning
documents to be sent or copied.

Increases the speaker volume (after
pressing the MONITOR button)

QUICKDIAL

Sets the machine for you to dial out

numbers stored under the Quickdial
function.

A-a

Selects capital or lower case letters
when storing names in the memory.

LAST TX

Prints a status report on last fax sent.

REDIAL

Redials the last number.

EXTERNAL

(If connected to a switchboard): can be
programmed to give you an outside
line, ready to dial.

PAUSE

Inserts a pause in a number.

HOLD

Puts a telephone call on hold.

2. TONE

Use this key to detect secondary dial
tone on certain PBXs. When this
function is activated, a colon will
appear in the display.

MONITOR

Allows you to dial a telephone number
without lifting the handset. You can
hear the line tone and dialling tone
through the internal loudspeaker.
A telephone will need to be connected
for you to be able to hold a
conversation.

START

Use to send or copy a document.
Confirms the choices and selections
you make on the FUNCTION button.

STOP

Stops any current operation; resets the
machine if there is an operating error.