BT DF450 User Manual
Page 18
Using your DF450
15
To send a fax
You have a choice of ways to dial a fax number:
Normal dialling
•
Load document
•
Dial the number you want. (Press the
ᮤ ᮣ
buttons to move the cursor to change
any number you press by mistake.)
•
Press the
START
button.
•
After the last page has been sent, the display
shows
TX COMPLETED
and you hear a beep.
One-touch dialling
•
Load document
•
Press the
one-touch
button you want (1-10),
display shows the name and number stored.
•
Your fax is sent automatically.
•
After the last page has been sent, the display
shows
TX COMPLETED
and you hear a beep.
Quick dialling
•
Load document
•
Press the
QUICKDIAL
button.
•
Using the keypad, dial the two digit short
code (01 - 32) you want; the display shows
the name and number you have stored in
the memory.
•
Your fax is sent automatically.
•
After the last page has been sent, display
shows
TX COMPLETED
for a few seconds.
If the number you are calling is engaged or the
connection is not made, your DF450 will
automatically redial the number every two
minutes up to three times.
Sending small text or pages with pictures.
If you are sending small print, illustrations or
photographs, you can alter the RESOLUTION and
CONTRAST
settings to ensure the clearest possible
transmission. See Additional Features, page 25.
To see the numbers and names stored in the
Quickdial memory, press the QUICKDIAL button
then the
ᮤ ᮣ
buttons to scroll backward and
forward through the list.
If your fax stops for any reason, you will hear a
three-second beep and the
ERROR
light comes
on. Press the
STOP
button remove any
remaining paper and begin the process again.
If pre-selected, an error report will be
automatically printed (see page 26).
To redial the last number
Your DF450 will redial a fax number for you.
•
Press the
REDIAL
button; the display shows
last number dialled.
•
Press the
REDIAL
button again; number is
dialled.
To stop a fax you are sending
If you choose, you can stop a fax during
transmission.
•
Press the
STOP
button once to halt the
transmission and once again to eject a
page currently being scanned.
•
Press the
STOP
button again to return
the machine to standby.