Storing one-touch and quickdial numbers and names – BT DF450 User Manual

Page 24

Using your DF450

Storing one-touch and Quickdial
numbers and names

To store one-touch numbers and names

You can store a fax number, phone number and
a name under each of the 10 One-Touch
buttons. Each number can be up to 38 digits
long and each name up to16 characters long.

To enter a fax number

•

Press the

FUNCTION

button, display

shows

FAX SET-UP.

•

Press the

START

button.

•

Press the

FUNCTION

button until the display

shows

ONE TOUCH DIAL

•

Press the

START

button and then the (1-10)

button under which you want to store the
number/name; the display shows

FAX NO:

START/STOP/< >

•

Press the

START

button.

•

Dial the fax number you want.

•

Press the

START

button to confirm the

setting.

After confirming the number, the display
shows

SPEED

. This is already set to the fastest

possible transmission speed and you will not
normally need to adjust it. Press the

START

button, display shows

OVERSEAS

If you have entered an overseas number, press
the

ᮤ ᮣ

buttons to select

from the display

as this ensures clearer transmission.

•

Press the

START

button to confirm setting;

the display shows:

NAME

You can now key in the name of the person or
company whose number you have just entered.

If you are connected to a switchboard, you may
also need to store a pause or PBX access code
using the

EXTERNAL/PAUSE

button, see page 31,

Connecting to a switchboard.

If you make a mistake when keying in a number,
you can delete it by pressing the

CLEAR

button.

START

FUNCTION